Piranha Pumps & Dredges: dewatering, slurry, solids, floating pumps


Dredge Pumping System

For Power Plants, Mining, Beach Restoration 
Wash Fines, Sand & Gravel Production, Mine tailings


Length…………….5,6 m
Width……………..2,5 m
Height…………….2,8 m 
Total Weight……..1540 kg
Draft………………..0,3 m
Ultra High Molecular
Polyethylene Modular/Foam Filled

Excavation Depth: 0-12 m 
Excavation Speed: 0-12 m per minute

Type: Severe Duty Slurry/Agitator 
With High Chrome Iron Wear Parts 
20 hp, 1170 RPM, 460 V or 380 V. 
1.35 Service Factor 
Seal moisture & motor over temp sensor 
Max. Spherical Solids: 38 mm


Control Panel: 
Skid mounted remote control 
Power: 3 phase, 460 V / 60 hz or 380 V / 50 Hz 
Manual push button w/indicator lights 
Main pump on/off, hoist up/down, traverse fwd/off/rev. 
Main circuit breaker 
Separate breakers for each branched circuit 
Magnetic contactors w/overloads & reset push buttons 
Moisture sensor relay with indicator light 
Motor overtemp relay with indicator light 
Fused 120 V control circuit 
Run time hour meter 
Digital ammeter 
NEMA 3R enclosure 
Urethane powder coated finish

Hoist Winch: 
2 hp, TEFC, 460 VAC or 380 VAC
Grooved drum & cable tensioning bar 
Over haul ball weight 
Fail safe dual brake system 
Speed: 4,5 m per minute 
Continuous load rating: 2180 kg
Intermittent load rating: 2800 kg
Hoist Cable: 3/8” 7 x 5,8 galvanized aircraft cable 
Cable nominal strength: 6530 kg 
Adjustable pump elevation limit switches w/manual override

Four corner lifting eyes & single point pickup 
Oven baked urethane powder coated finish 
304 stainless steel fasteners 
Discharge hose management roller guides


Piranha Pumps & Dredges
Ph.: +1 (505) 822-0449

+38 (050) 638-7576



Sales: Central, Eastern Europe & the CIS
Tel.:  +38 (044) 465-5082

Viber / WhatsApp:   +38 (050) 638-7576